A simulator is the perfect place to practice judgment, timing, and managing workload when the pressure is on. Our Sim Challenges make it easy to get a good workout—at home—using Microsoft Flight Simulator or X-Plane. Along the way, you’ll answer thought-provoking questions and learn from an expert’s real-world insights.
In this month’s challenge, you’ll discover the difference between approved vertical guidance and advisory vertical guidance—and what can happen if you follow advisory vertical guidance below MDA.
IFR flying rarely fails because a pilot doesn’t know the rules—it becomes challenging when those rules are applied in real time, under workload, while managing aircraft control, navigation, and communication simultaneously.
This month’s quiz focuses on the intersection of IFR knowledge and flight deck workload. From abbreviated clearances and departure procedures to in-flight weather requests and urgency communications, each question reflects situations where understanding the regulation is only part of the challenge. The real test is how quickly and accurately you can interpret, respond, and prioritize when ATC adds another layer to an already busy cockpit.
ATC will use the phrase "CLEARED AS FILED" when issuing an abbreviated IFR clearance. This means:
Correct!Wrong!
When departing from an airport not served by a control tower, the issuance of a clearance containing a void time indicates that
Correct!Wrong!
How is your flight plan closed when your destination airport has IFR conditions and there is no control tower on the field?
Correct!Wrong!
Which clearance procedures may be issued by ATC without prior pilot request?
Correct!Wrong!
What is meant when departure control instructs you to 'resume own navigation' after you have been vectored to a Victor airway?
Correct!Wrong!
Pilots on IFR flights seeking ATC in flight weather avoidance assistance should keep in mind that
Correct!Wrong!
What response is expected when ATC issues an IFR clearance to pilots of airborne aircraft?
Correct!Wrong!
An abbreviated departure clearance '...CLEARED AS FILED...' will always contain the name
Correct!Wrong!
Which scenario represents a case where you’d need to use the “Urgency” communication procedure?
Correct!Wrong!
While performing a VFR practice instrument approach, Radar Approach Control assigns an altitude or heading that will cause you to enter the clouds. What action should you take?
One of the great ironies of IFR flying is that once you have the right to fly through the clouds, you take almost every opportunity to stay out of them. It’s simpler, faster, and arguably safer (at least at the GA level) to shortcut full procedures with visual ones. The go-to “instrument approach” for keeping the mail moving is: “Cleared for the visual.”
However, a casual demeanor can be an invitation for catastrophe — or at least a letter of investigation from the authorities. So it’s worth a review of the corner-cases and gotchas hidden in the plain-sight (visual) approach.
First off, conditions must be basically VFR. Weather reporting at the destination isn’t required so long as some reliable source says there’s at least 1000-foot ceilings and three miles visibly. In practice, it often requires more. The pilot can ask for the visual, or ATC can assign it. However, the pilot must have the airport, or the preceding aircraft, in sight.
Key Takeaway:
A visual approach is still an IFR clearance—but once ATC clears you for the visual, you’re responsible for avoiding both traffic and terrain.
There’s trap number one: When you report the preceding aircraft in sight, you are responsible for separation. If you lose track of that aircraft (or the airport), you must tell ATC ASAP. If you’re at an uncontrolled airport, that may mean switching frequencies back and asking ATC if they still see that aircraft on radar.
On those lines, once ATC clears you to contact Tower or the advisory frequency, radar service is automatically terminated. Don’t be fooled because you still have a transponder code. You’re still IFR, but you’ve assumed separation from both aircraft and obstacles. This is true if you ask to switch to advisory early as well. It’s unlikely to be an issue while the sun shines, but when you’re cleared for the visual at night, that’s another story. Sometimes it’s a story of a Southwest 737 that lands at the wrong airport because ATC was no longer watching with the God’s-eye view.
That said, ATC can’t release you unless all traffic conflicts are resolved. Given that there’s no restriction on how you proceed visually to the airport, sometimes you’ll get cleared with a restriction, “Maintain 4000 and contact Tower …” or something similar. Take that as a heads up there’s a potential conflict that needs tying up. At bigger airports (pretty much Class C and above) there are complex letters of agreement on exactly where and how Approach can release visual approaches to Tower to minimize issues. RNAV aircraft can be cleared direct to a published FAF as part of getting cleared for a visual.
Technically, ATC could release two aircraft on visuals to the same uncontrolled airport provided the second one had the first in sight. In practice, that’s the kind of scenario that gives controllers hives. Two aircraft, out of communication, both going for the same airport, yet both IFR with requirements to protect the airspace in case they pop back up needing services again.
Non-Towered Airport Reality
An IFR aircraft cleared for a visual approach to a non-towered airport can block other IFR arrivals until it cancels IFR.
A takeaway for us pilots is that when cleared for a visual to an uncontrolled field, we tie up that airport — and maybe other nearby airports — until we cancel IFR. That may seem bizarre on a CAVU day when the pattern could be full of VFR aircraft, but it’s true. So if you can cancel, do it. If you can’t contact ATC directly, try relaying through that aircraft behind you. And if you’re the aircraft behind waiting for the visual, call to the person in front and see if they’re willing to cancel, or just cancel yourself and proceed VFR.
There’s not much gain in retaining your IFR status if you can cancel and fly VFR. Once you cancel IFR, you must maintain VFR cloud clearances appropriate for the airspace. That’s likely the common 1000 above, 500 below and 2000 feet laterally, potentially all the way to the surface (see sidebar: Over-Eager IFR Cancellation).
The only real gain in staying IFR is if you can’t land. There is no missed approach procedure for a visual. You’re expected to land as soon as practical if you go around, or stay clear of clouds until issued a new clearance. But that should come faster if ATC still has you in the system. And there won’t be any other IFR aircraft in your way.
Another point is that when you’re cleared for a visual to a towered airport, it’ll often be a visual to a specific runway. That’s a clearance, and changing runways requires permission. A visual to an uncontrolled field won’t have a runway assignment, but you’re still bound by the local traffic patterns. If it’s right traffic for Runway 36 and you’re arriving from the west, you’re expected to cross over the field before entering the downwind. It should go without saying that you’ll monitor the CTAF as early as possible and fit yourself into the VFR traffic flow as politely as practical.
Controllers need at least 500 feet cloud clearance above the MVA to vector an aircraft on a visual. There are workarounds. A controller can drive someone on a downwind for a published approach — that’s not a vector for a visual — but know they’ll likely report the field in sight and can hop off on a visual. Remember, if you’re cleared for a published approach, you can’t spontaneously switch to a visual. But you can always report the airport in sight and ask.
Lastly, keep the visual approach clear in your mind from its sister tool, the contact approach. The key difference is that the visual is essentially a way to complete your flight in VFR conditions and with VFR simplicity. The contact approach is akin to Special VFR. The requirements are only one-mile visibility and maintaining clear of clouds. You don’t need the airport in sight, so long as you have reasonable confidence in getting there visually. It can’t be assigned; the pilot must request it.
Personally, I prefer requesting a contact approach rather than a visual when I’m making the request because I get all the flexibility without a requirement for the airport to report VFR conditions.
Well, almost all the flexibility. You can’t ask for a contact approach to an airport that has no published approach procedure. You can do that with a visual. Similarly, you can’t fly part of a published approach to Airport A and then sidestep on a contact approach to Airport B. That’s a common request with a visual.
And well it should be because that’s how the mail keeps moving … so long as the conditions are right.
Watch This Video: “Special VFR vs. Contact Approach.”
Over-Eager IFR Cancellation
You can almost hear the longing in the controller’s voice: “Report IFR cancellation on this frequency or (sigh) on the ground …” If you can safely and legally cancel IFR before landing at an uncontrolled field, it helps everyone in the system. Safe is up to you, and often not an issue. Legal? That can be a gotcha.
Remember that you must be in VFR conditions appropriate for the airspace because you forfeit all IFR privileges when you cancel. That’s easy to forget with runway lights in sight after two hours of droning along in IMC. The classic trap is when the airport has a Class E surface area, so the rule of 2000 feet laterally and 500 below extends all the way to the surface. As much as you might want to cancel IFR in the air so the next aircraft can get in behind you, it’s a violation of 91.155 if you can’t maintain VFR, or the ceiling is less than 1000 AGL. It’s worth noting where those Class E extensions are for approaches, and what happens at towered airports when the tower closes. Some revert to Class E at the surface. Others become Class G.
Cancelling early isn’t a big-time savings to you, especially if there’s radio reception or cell phone coverage on the ground. Call the controlling facility on the number listed in the Chart Supplement to cancel, or via RCO if that’s the local custom. Or even relay your cancellation through the waiting aircraft.
Pilot Survey
https://media.ifrfocus.com/wp-content/uploads/2026/06/11093638/Practical-IFR-Visual-Approaches.png10001250Jeff Van Westhttps://media.ifrfocus.com/wp-content/uploads/2025/07/14115136/IFR-Focus-Logo_White_Blue_Web-01.pngJeff Van West2026-06-16 08:55:162026-06-18 11:53:46Practical IFR: Visual Approaches
One of the most valuable lessons I learned as a professional pilot happened during my first few days flying the Saab 340 for a regional airline. It wasn’t during a thunderstorm, an engine failure, or a difficult instrument approach. It happened on a routine flight between Pittsburgh and Columbus, a flight so short that we barely had time to level off before beginning our descent.
As a new first officer, I believed the challenge of IFR flying was controlling the airplane. What I learned that day was that the real challenge is managing workload.
We landed in Columbus, and while the captain completed his post-flight duties, I began working through what I thought were my priorities: obtaining the ATIS, requesting our clearance, and organizing paperwork for the next leg. A few minutes later, I turned around and noticed a cabin full of passengers staring at me.
Confused, I asked the captain when the passengers were going to board.
He looked at me and said, “They already did. We deplaned the previous passengers, unloaded their bags, loaded the new bags, boarded the next passengers, completed the preflight, got the ATIS, received the clearance, and we’re ready to go. We’re just waiting on you.”
I wasn’t overwhelmed because the flight was difficult. I was overwhelmed because I didn’t have a system.
That experience taught me a lesson that has stayed with me throughout my aviation career: most IFR workload management happens long before the airplane leaves the ground.
“I wasn’t overwhelmed because the flight was difficult. I was overwhelmed because I didn’t have a system.”
The Myth of Multitasking
Many pilots believe workload management means handling multiple tasks at once. In reality, effective workload management means reducing the number of decisions you have to make in real time.
When pilots become overloaded, it is rarely because they are physically incapable of performing the tasks. Instead, they become overwhelmed because they are constantly asking themselves:
What do I need to do next?
What am I forgetting?
What’s coming up?
Did I miss something?
Every one of those questions consumes mental bandwidth.
The most effective IFR pilots are not necessarily faster or smarter. They simply have systems that allow them to anticipate rather than react.
The Flight Begins Before the Engine Starts
A large portion of IFR workload can be eliminated before you ever reach the airplane.
Before every flight, ask yourself:
What is the weather doing at departure, destination, and alternate airports?
What NOTAMs actually affect me?
What departure procedure am I likely to receive?
What arrival and approach are most likely based on current conditions?
What are my threats for this flight?
Many pilots review information but fail to organize it.
Reading thirty pages of weather products is not preparation. Distilling those thirty pages into three or four critical takeaways is preparation.
The goal is not to memorize information. The goal is to identify what matters.
When you arrive at the airplane already understanding the operational picture, your workload decreases dramatically because you’re no longer processing information for the first time.
“Reading thirty pages of weather products is not preparation. Distilling those thirty pages into three or four critical takeaways is preparation.”
Stay Ahead of the Airplane
The phrase “stay ahead of the airplane” is one of the most common pieces of advice in aviation. Unfortunately, many pilots hear it without understanding what it actually means.
Staying ahead of the airplane means using periods of low workload to prepare for periods of high workload.
During cruise flight, ask yourself:
What’s the expected arrival?
What approach am I likely to receive?
What frequencies will I need?
What altitudes are critical?
What threats exist on the arrival?
Waiting until approach control issues a clearance before opening the chart is a recipe for stress.
Instead, use cruise time to brief multiple possibilities. If ATC changes your assignment, you’ll already have a framework in place.
The goal is to never be surprised.
Build Consistent Cockpit Flows
One of the biggest differences between experienced and inexperienced pilots is consistency.
New pilots often perform cockpit tasks in a random order based on whatever catches their attention.
Experienced pilots develop repeatable flows.
A consistent flow allows you to move through the cockpit the same way every time, reducing the likelihood of omissions and mistakes.
This applies to:
Preflight inspections
Before-start procedures
Before-takeoff checks
Cruise management
Approach setup
Before-landing checks
Shutdown procedures
Discipline creates efficiency.
When your cockpit organization becomes habitual, your brain is free to focus on decision-making instead of task management.
Prioritize Aviate, Navigate, Communicate
The classic hierarchy remains true because it works.
When workload increases, pilots often become distracted by secondary tasks.
A clearance amendment, a reroute, an equipment issue, or a radio call can quickly draw attention away from aircraft control.
The order never changes:
Aviate
Navigate
Communicate
If the airplane is not under control, nothing else matters.
One of the most important skills a single-pilot IFR operator can develop is the ability to delay nonessential tasks until the airplane is stable.
Not every request requires an immediate response.
Sometimes the safest answer is:
“Stand by.”
Guard Against Task Saturation
Task saturation rarely arrives all at once.
Instead, it develops gradually.
You miss a radio call.
Then you fall behind on programming the GPS.
Then ATC issues a new clearance.
Then weather changes.
Then you’re trying to brief an approach while descending through busy airspace.
The warning signs are usually subtle:
Fixating on one task
Missing radio calls
Falling behind checklists
Losing situational awareness
Feeling rushed
When you recognize these symptoms, stop and reassess.
Slow down.
Prioritize.
Fly the airplane.
The willingness to pause and reorganize often prevents minor workload issues from becoming serious problems.
Flight Deck Discipline Creates Capacity
Ultimately, flight deck discipline is not about perfection.
It is about creating mental capacity.
Every organized checklist, every standardized flow, every pre-briefed approach, and every moment spent preparing ahead of time frees up cognitive resources for the unexpected.
IFR flying is not difficult because airplanes are hard to fly.
It is difficult because information arrives continuously, often faster than we can process it.
The pilots who excel in IFR environments are not the ones who work the hardest in the moment. They are the ones who have already done the work before the moment arrives.
“The pilots who excel in IFR environments are not the ones who work the hardest in the moment. They are the ones who have already done the work before the moment arrives.”
The biggest lesson from that short flight between Pittsburgh and Columbus wasn’t about flying a Saab 340. It was about understanding that professional pilots don’t simply react to events as they happen.
They anticipate.
They prepare.
They stay ahead of the airplane.
And because of that, the airplane never seems nearly as fast.
https://media.ifrfocus.com/wp-content/uploads/2026/06/09215110/Managing-IFR-Workload-and-Flight-Deck-Discipline-Staying-Ahead-of-the-Airplane.png10001250James Oniealhttps://media.ifrfocus.com/wp-content/uploads/2025/07/14115136/IFR-Focus-Logo_White_Blue_Web-01.pngJames Onieal2026-06-12 08:55:472026-06-10 14:25:45Managing IFR Workload and Flight Deck Discipline: Staying Ahead of the Airplane
For many instrument rating applicants, preparing for the checkride can feel like drinking from a firehose. The FAA’s Airman Certification Standards (ACS) clearly define what applicants must know, consider, and demonstrate, but they often leave students wondering how those standards are actually evaluated during the practical test.
To help bridge that gap, PilotWorkshops has introduced Checkride Insights: Instrument Rating, a new training resource that adds practical context and examiner perspectives directly alongside the ACS.
While the guide is designed for instrument rating applicants, it also includes a dedicated section on the Instrument Proficiency Check (IPC), making it a valuable resource for already-rated instrument pilots looking to regain IFR currency. Since IPCs are based on many of the same ACS standards used during an instrument checkride, the examiner insights and practical guidance apply equally well to pilots preparing for either evaluation.
The publication uses a simple but powerful format: the official ACS appears on one side of the page, while annotations from chief instructors, check airmen, and designated pilot examiners (DPEs) appear alongside the relevant standards. These notes explain how tasks are typically evaluated, identify common mistakes, and highlight areas where applicants often struggle.
See an Annotated ACS Task
Wondering what makes Checkride Insights different?
Download a free sample featuring the Precision Approach task and see how DPE comments, instructor guidance, and practical explanations are integrated directly into the ACS.
Rather than encouraging applicants to memorize ACS elements, the guide focuses on understanding how the standards are applied in real-world IFR flying. Topics range from flight planning and weather analysis to instrument approaches, missed approaches, and cockpit workload management.
One of the most valuable aspects of the guide is its ability to provide context. An ACS requirement may seem straightforward on paper, but the accompanying notes reveal the types of scenarios, follow-up questions, and decision-making discussions that frequently arise during both the oral exam and flight portion of a practical evaluation.
For IFR Focus readers, the IPC content may be especially valuable. Whether you’re preparing for an initial instrument rating, returning to instrument flying after a lapse in currency, or simply looking to sharpen your IFR skills, understanding how the ACS is applied in a practical evaluation can make training more focused and effective.
The result is a study resource designed to help pilots prepare more efficiently, reduce anxiety, and develop a deeper understanding of the standards they’ll be expected to meet.
Checkride Insights: Instrument Rating is available in both digital and spiral-bound print formats and can be used as a companion to traditional instrument training materials and the FAA ACS.
As instrument pilots know, success during a checkride—or an IPC—isn’t just about knowing the standards. It’s about understanding how to apply them in realistic situations. Resources that provide that additional context can make preparation more practical, efficient, and ultimately more successful.
https://media.ifrfocus.com/wp-content/uploads/2025/08/19095034/The-Foundation-of-IFR-Flying-Basic-Attitude-Instrument-Skills.png10001250Eric Radtkehttps://media.ifrfocus.com/wp-content/uploads/2025/07/14115136/IFR-Focus-Logo_White_Blue_Web-01.pngEric Radtke2026-06-09 08:55:042026-06-09 14:59:26New Resource Helps Demystify the Instrument Checkride—and the IPC
Many instrument pilots learned the classic “5 Ts” as a way to stay organized when crossing a fix: Turn, Time, Twist, Throttle, and Talk. While that checklist still has value, today’s GPS-equipped cockpits call for a broader scan of the airplane’s status and your overall flight plan. That’s where the CAPERS check comes in—a modern framework that helps you stay ahead of the airplane by reviewing the most important elements of the flight whenever you’re crossing a fix, receiving a new clearance, or transitioning to a new phase of flight.
CAPERS Checklist
C — Course: Verify the next course to fly and ensure the correct navigation source is in use.
A — Altitude: Confirm your current and upcoming altitude requirements.
P — Profile: Verify the correct pitch, power and configuration profile required.
E — Estimated Time: Verify the estimated time to the next fix and a quick situational check.
R — Radios: Talk to ATC or on the CTAF as needed.
S — Safety and Switches: Review aircraft systems, lights, fuel, and other critical items.
Sim Challenge: Trusting the Wrong Glidepath
/by Lee SmithA simulator is the perfect place to practice judgment, timing, and managing workload when the pressure is on. Our Sim Challenges make it easy to get a good workout—at home—using Microsoft Flight Simulator or X-Plane. Along the way, you’ll answer thought-provoking questions and learn from an expert’s real-world insights.
In this month’s challenge, you’ll discover the difference between approved vertical guidance and advisory vertical guidance—and what can happen if you follow advisory vertical guidance below MDA.
Take the challenge!
Quiz: IFR Procedures & Workload Management
/by IFR Focus TeamIFR flying rarely fails because a pilot doesn’t know the rules—it becomes challenging when those rules are applied in real time, under workload, while managing aircraft control, navigation, and communication simultaneously.
This month’s quiz focuses on the intersection of IFR knowledge and flight deck workload. From abbreviated clearances and departure procedures to in-flight weather requests and urgency communications, each question reflects situations where understanding the regulation is only part of the challenge. The real test is how quickly and accurately you can interpret, respond, and prioritize when ATC adds another layer to an already busy cockpit.
Share the quiz to show your results !
Facebook
Facebook
Share your results :
Facebook
Facebook
Twitter
Google+
Practical IFR: Visual Approaches
/by Jeff Van WestOne of the great ironies of IFR flying is that once you have the right to fly through the clouds, you take almost every opportunity to stay out of them. It’s simpler, faster, and arguably safer (at least at the GA level) to shortcut full procedures with visual ones. The go-to “instrument approach” for keeping the mail moving is: “Cleared for the visual.”
However, a casual demeanor can be an invitation for catastrophe — or at least a letter of investigation from the authorities. So it’s worth a review of the corner-cases and gotchas hidden in the plain-sight (visual) approach.
First off, conditions must be basically VFR. Weather reporting at the destination isn’t required so long as some reliable source says there’s at least 1000-foot ceilings and three miles visibly. In practice, it often requires more. The pilot can ask for the visual, or ATC can assign it. However, the pilot must have the airport, or the preceding aircraft, in sight.
Key Takeaway:
A visual approach is still an IFR clearance—but once ATC clears you for the visual, you’re responsible for avoiding both traffic and terrain.
There’s trap number one: When you report the preceding aircraft in sight, you are responsible for separation. If you lose track of that aircraft (or the airport), you must tell ATC ASAP. If you’re at an uncontrolled airport, that may mean switching frequencies back and asking ATC if they still see that aircraft on radar.
On those lines, once ATC clears you to contact Tower or the advisory frequency, radar service is automatically terminated. Don’t be fooled because you still have a transponder code. You’re still IFR, but you’ve assumed separation from both aircraft and obstacles. This is true if you ask to switch to advisory early as well. It’s unlikely to be an issue while the sun shines, but when you’re cleared for the visual at night, that’s another story. Sometimes it’s a story of a Southwest 737 that lands at the wrong airport because ATC was no longer watching with the God’s-eye view.
That said, ATC can’t release you unless all traffic conflicts are resolved. Given that there’s no restriction on how you proceed visually to the airport, sometimes you’ll get cleared with a restriction, “Maintain 4000 and contact Tower …” or something similar. Take that as a heads up there’s a potential conflict that needs tying up. At bigger airports (pretty much Class C and above) there are complex letters of agreement on exactly where and how Approach can release visual approaches to Tower to minimize issues. RNAV aircraft can be cleared direct to a published FAF as part of getting cleared for a visual.
Technically, ATC could release two aircraft on visuals to the same uncontrolled airport provided the second one had the first in sight. In practice, that’s the kind of scenario that gives controllers hives. Two aircraft, out of communication, both going for the same airport, yet both IFR with requirements to protect the airspace in case they pop back up needing services again.
Non-Towered Airport Reality
An IFR aircraft cleared for a visual approach to a non-towered airport can block other IFR arrivals until it cancels IFR.
A takeaway for us pilots is that when cleared for a visual to an uncontrolled field, we tie up that airport — and maybe other nearby airports — until we cancel IFR. That may seem bizarre on a CAVU day when the pattern could be full of VFR aircraft, but it’s true. So if you can cancel, do it. If you can’t contact ATC directly, try relaying through that aircraft behind you. And if you’re the aircraft behind waiting for the visual, call to the person in front and see if they’re willing to cancel, or just cancel yourself and proceed VFR.
There’s not much gain in retaining your IFR status if you can cancel and fly VFR. Once you cancel IFR, you must maintain VFR cloud clearances appropriate for the airspace. That’s likely the common 1000 above, 500 below and 2000 feet laterally, potentially all the way to the surface (see sidebar: Over-Eager IFR Cancellation).
The only real gain in staying IFR is if you can’t land. There is no missed approach procedure for a visual. You’re expected to land as soon as practical if you go around, or stay clear of clouds until issued a new clearance. But that should come faster if ATC still has you in the system. And there won’t be any other IFR aircraft in your way.
Another point is that when you’re cleared for a visual to a towered airport, it’ll often be a visual to a specific runway. That’s a clearance, and changing runways requires permission. A visual to an uncontrolled field won’t have a runway assignment, but you’re still bound by the local traffic patterns. If it’s right traffic for Runway 36 and you’re arriving from the west, you’re expected to cross over the field before entering the downwind. It should go without saying that you’ll monitor the CTAF as early as possible and fit yourself into the VFR traffic flow as politely as practical.
Controllers need at least 500 feet cloud clearance above the MVA to vector an aircraft on a visual. There are workarounds. A controller can drive someone on a downwind for a published approach — that’s not a vector for a visual — but know they’ll likely report the field in sight and can hop off on a visual. Remember, if you’re cleared for a published approach, you can’t spontaneously switch to a visual. But you can always report the airport in sight and ask.
Lastly, keep the visual approach clear in your mind from its sister tool, the contact approach. The key difference is that the visual is essentially a way to complete your flight in VFR conditions and with VFR simplicity. The contact approach is akin to Special VFR. The requirements are only one-mile visibility and maintaining clear of clouds. You don’t need the airport in sight, so long as you have reasonable confidence in getting there visually. It can’t be assigned; the pilot must request it.
Personally, I prefer requesting a contact approach rather than a visual when I’m making the request because I get all the flexibility without a requirement for the airport to report VFR conditions.
Well, almost all the flexibility. You can’t ask for a contact approach to an airport that has no published approach procedure. You can do that with a visual. Similarly, you can’t fly part of a published approach to Airport A and then sidestep on a contact approach to Airport B. That’s a common request with a visual.
And well it should be because that’s how the mail keeps moving … so long as the conditions are right.
Watch This Video: “Special VFR vs. Contact Approach.”
Over-Eager IFR Cancellation
You can almost hear the longing in the controller’s voice: “Report IFR cancellation on this frequency or (sigh) on the ground …” If you can safely and legally cancel IFR before landing at an uncontrolled field, it helps everyone in the system. Safe is up to you, and often not an issue. Legal? That can be a gotcha.
Remember that you must be in VFR conditions appropriate for the airspace because you forfeit all IFR privileges when you cancel. That’s easy to forget with runway lights in sight after two hours of droning along in IMC. The classic trap is when the airport has a Class E surface area, so the rule of 2000 feet laterally and 500 below extends all the way to the surface. As much as you might want to cancel IFR in the air so the next aircraft can get in behind you, it’s a violation of 91.155 if you can’t maintain VFR, or the ceiling is less than 1000 AGL. It’s worth noting where those Class E extensions are for approaches, and what happens at towered airports when the tower closes. Some revert to Class E at the surface. Others become Class G.
Cancelling early isn’t a big-time savings to you, especially if there’s radio reception or cell phone coverage on the ground. Call the controlling facility on the number listed in the Chart Supplement to cancel, or via RCO if that’s the local custom. Or even relay your cancellation through the waiting aircraft.
Pilot Survey
Managing IFR Workload and Flight Deck Discipline: Staying Ahead of the Airplane
/by James OniealAs a new first officer, I believed the challenge of IFR flying was controlling the airplane. What I learned that day was that the real challenge is managing workload.
We landed in Columbus, and while the captain completed his post-flight duties, I began working through what I thought were my priorities: obtaining the ATIS, requesting our clearance, and organizing paperwork for the next leg. A few minutes later, I turned around and noticed a cabin full of passengers staring at me.
Confused, I asked the captain when the passengers were going to board.
He looked at me and said, “They already did. We deplaned the previous passengers, unloaded their bags, loaded the new bags, boarded the next passengers, completed the preflight, got the ATIS, received the clearance, and we’re ready to go. We’re just waiting on you.”
I wasn’t overwhelmed because the flight was difficult. I was overwhelmed because I didn’t have a system.
That experience taught me a lesson that has stayed with me throughout my aviation career: most IFR workload management happens long before the airplane leaves the ground.
“I wasn’t overwhelmed because the flight was difficult. I was overwhelmed because I didn’t have a system.”
The Myth of Multitasking
Many pilots believe workload management means handling multiple tasks at once. In reality, effective workload management means reducing the number of decisions you have to make in real time.
When pilots become overloaded, it is rarely because they are physically incapable of performing the tasks. Instead, they become overwhelmed because they are constantly asking themselves:
Every one of those questions consumes mental bandwidth.
The most effective IFR pilots are not necessarily faster or smarter. They simply have systems that allow them to anticipate rather than react.
The Flight Begins Before the Engine Starts
A large portion of IFR workload can be eliminated before you ever reach the airplane.
Before every flight, ask yourself:
Many pilots review information but fail to organize it.
Reading thirty pages of weather products is not preparation. Distilling those thirty pages into three or four critical takeaways is preparation.
The goal is not to memorize information. The goal is to identify what matters.
When you arrive at the airplane already understanding the operational picture, your workload decreases dramatically because you’re no longer processing information for the first time.
“Reading thirty pages of weather products is not preparation. Distilling those thirty pages into three or four critical takeaways is preparation.”
Stay Ahead of the Airplane
The phrase “stay ahead of the airplane” is one of the most common pieces of advice in aviation. Unfortunately, many pilots hear it without understanding what it actually means.
Staying ahead of the airplane means using periods of low workload to prepare for periods of high workload.
During cruise flight, ask yourself:
Waiting until approach control issues a clearance before opening the chart is a recipe for stress.
Instead, use cruise time to brief multiple possibilities. If ATC changes your assignment, you’ll already have a framework in place.
The goal is to never be surprised.
Build Consistent Cockpit Flows
One of the biggest differences between experienced and inexperienced pilots is consistency.
New pilots often perform cockpit tasks in a random order based on whatever catches their attention.
Experienced pilots develop repeatable flows.
A consistent flow allows you to move through the cockpit the same way every time, reducing the likelihood of omissions and mistakes.
This applies to:
Discipline creates efficiency.
When your cockpit organization becomes habitual, your brain is free to focus on decision-making instead of task management.
Prioritize Aviate, Navigate, Communicate
The classic hierarchy remains true because it works.
When workload increases, pilots often become distracted by secondary tasks.
A clearance amendment, a reroute, an equipment issue, or a radio call can quickly draw attention away from aircraft control.
The order never changes:
If the airplane is not under control, nothing else matters.
One of the most important skills a single-pilot IFR operator can develop is the ability to delay nonessential tasks until the airplane is stable.
Not every request requires an immediate response.
Sometimes the safest answer is:
“Stand by.”
Guard Against Task Saturation
Task saturation rarely arrives all at once.
Instead, it develops gradually.
You miss a radio call.
Then you fall behind on programming the GPS.
Then ATC issues a new clearance.
Then weather changes.
Then you’re trying to brief an approach while descending through busy airspace.
The warning signs are usually subtle:
When you recognize these symptoms, stop and reassess.
Slow down.
Prioritize.
Fly the airplane.
The willingness to pause and reorganize often prevents minor workload issues from becoming serious problems.
Flight Deck Discipline Creates Capacity
Ultimately, flight deck discipline is not about perfection.
It is about creating mental capacity.
Every organized checklist, every standardized flow, every pre-briefed approach, and every moment spent preparing ahead of time frees up cognitive resources for the unexpected.
IFR flying is not difficult because airplanes are hard to fly.
It is difficult because information arrives continuously, often faster than we can process it.
The pilots who excel in IFR environments are not the ones who work the hardest in the moment. They are the ones who have already done the work before the moment arrives.
“The pilots who excel in IFR environments are not the ones who work the hardest in the moment. They are the ones who have already done the work before the moment arrives.”
The biggest lesson from that short flight between Pittsburgh and Columbus wasn’t about flying a Saab 340. It was about understanding that professional pilots don’t simply react to events as they happen.
They anticipate.
They prepare.
They stay ahead of the airplane.
And because of that, the airplane never seems nearly as fast.
New Resource Helps Demystify the Instrument Checkride—and the IPC
/by Eric RadtkeTo help bridge that gap, PilotWorkshops has introduced Checkride Insights: Instrument Rating, a new training resource that adds practical context and examiner perspectives directly alongside the ACS.
While the guide is designed for instrument rating applicants, it also includes a dedicated section on the Instrument Proficiency Check (IPC), making it a valuable resource for already-rated instrument pilots looking to regain IFR currency. Since IPCs are based on many of the same ACS standards used during an instrument checkride, the examiner insights and practical guidance apply equally well to pilots preparing for either evaluation.
The publication uses a simple but powerful format: the official ACS appears on one side of the page, while annotations from chief instructors, check airmen, and designated pilot examiners (DPEs) appear alongside the relevant standards. These notes explain how tasks are typically evaluated, identify common mistakes, and highlight areas where applicants often struggle.
See an Annotated ACS Task
Wondering what makes Checkride Insights different?
Download a free sample featuring the Precision Approach task and see how DPE comments, instructor guidance, and practical explanations are integrated directly into the ACS.
Get the sample PDF »
Rather than encouraging applicants to memorize ACS elements, the guide focuses on understanding how the standards are applied in real-world IFR flying. Topics range from flight planning and weather analysis to instrument approaches, missed approaches, and cockpit workload management.
One of the most valuable aspects of the guide is its ability to provide context. An ACS requirement may seem straightforward on paper, but the accompanying notes reveal the types of scenarios, follow-up questions, and decision-making discussions that frequently arise during both the oral exam and flight portion of a practical evaluation.
For IFR Focus readers, the IPC content may be especially valuable. Whether you’re preparing for an initial instrument rating, returning to instrument flying after a lapse in currency, or simply looking to sharpen your IFR skills, understanding how the ACS is applied in a practical evaluation can make training more focused and effective.
The result is a study resource designed to help pilots prepare more efficiently, reduce anxiety, and develop a deeper understanding of the standards they’ll be expected to meet.
Checkride Insights: Instrument Rating is available in both digital and spiral-bound print formats and can be used as a companion to traditional instrument training materials and the FAA ACS.
As instrument pilots know, success during a checkride—or an IPC—isn’t just about knowing the standards. It’s about understanding how to apply them in realistic situations. Resources that provide that additional context can make preparation more practical, efficient, and ultimately more successful.
Video Tip: CAPERS—The Modern IFR Fix-Crossing Check
/by Pilot WorkshopsMany instrument pilots learned the classic “5 Ts” as a way to stay organized when crossing a fix: Turn, Time, Twist, Throttle, and Talk. While that checklist still has value, today’s GPS-equipped cockpits call for a broader scan of the airplane’s status and your overall flight plan. That’s where the CAPERS check comes in—a modern framework that helps you stay ahead of the airplane by reviewing the most important elements of the flight whenever you’re crossing a fix, receiving a new clearance, or transitioning to a new phase of flight.
CAPERS Checklist